Skip to content
ErindaleLock ExpertsOpen 24/7 (289) 805-4851
Technician inspecting splintered wood around a door-frame strike plate. — Break-In Damage Lock Repair, Sheridan Homelands

Lockouts · Sheridan Homelands

Break-In Damage Lock Repair

Police have come and gone, the occurrence number is on a sticky note, and you are standing in a cold hallway looking at a splintered frame, wondering how the house gets locked before everyone tries to sleep.

In plain words

When a home is broken into, the locks are not the only thing that has changed hands. Keys hanging in the hall, a spare in a drawer, a garage remote on a visor or a house key on a stolen car's ring may all be gone. Part of break-in damage repair is closing that door too. Every cylinder those keys fit is rekeyed or replaced and fresh keys are cut, the mailbox and padlocks are considered, and you are reminded to reset the garage opener and any alarm codes that were written down. The forced door gets fixed, and the missing keys stop mattering at the same time.

Sound familiar?Sheridan Homelands

The call
The shop's aluminum door has a bent meeting stile and the hookbolt is jammed half out. The alarm did its job and the display is untouched, but the entrance will not close properly and opening time is hours away.

NextHow the visit goes

Break-In Damage Lock Repair · Sheridan Homelands

How the visit goes

Hands fitting a steel door knob into the bore of a dark door, with a yellow drill and tool bag behind. — Sheridan Homelands
  1. Scene 1

    What is behind the jamb

    Long screws only help if there is something solid to bite into, so the locksmith looks at how the frame is built. Most house doors have a wood jamb, a shim space and then a stud, and three-inch screws reach through all three. A door beside a sidelight has glass where the stud would be, so fasteners are chosen for that construction instead. A jamb fixed to a masonry return, a steel frame in a commercial building, or a fire-rated suite door in an apartment corridor each call for their own hardware and fixing method. Knowing the wall before choosing the screws is what makes the reinforcement real.

  2. Scene 2

    Rekeying what a taken key fits

    Every cylinder that a missing key could open is rekeyed or replaced before the locksmith leaves. On a serviceable pin-tumbler cylinder, the plug is slid free with a follower so the springs stay put, the bottom pins are exchanged for a new combination and a fresh key is cut; a cylinder that cannot be rekeyed this way is replaced instead. Front, back, side and garage doors are brought onto one new key where their keyways and systems allow it, and the mailbox and padlocks are handled too. Remotes for a garage opener that left in a stolen car are erased from the opener and a new one programmed. The old key still fits the keyway; it simply turns nothing anymore.

  3. Scene 3

    What another trade still needs to do

    Locksmith hardware fixes a great deal, but a shattered frame, a broken door slab or a smashed sidelight belongs to a carpenter, door installer or glazier. When that is the case you leave with the opening secured, a clear list of what the other trade needs to do, and hardware chosen so it transfers to the new frame or door rather than being bought twice. The temporary securing is designed to hold comfortably until that work is booked. Insurers let you choose your own contractor, so the list is written for whoever you pick, and the locksmith is available to fit the final hardware once the woodwork is done.

In the van

  • Jamb repair plate
  • Replacement cylinder or core
  • Three-inch strike and hinge screws
  • Plywood and cleats for boarding
  • Rekeying pins and key blanks

What shapes the quoteErindale Lock Experts

Door and frame material
A wood jamb over a stud takes standard reinforcement. Steel frames, jambs on masonry, fibreglass doors and aluminum storefront stiles each need their own fasteners and methods, which changes both labour and parts.
Method of jamb repair
Bonding a split with epoxy and a repair plate is one line; fitting a new section of wood is another; a full jamb leg through a carpenter is quoted by that trade.
Work referred to another trade
A shattered frame, a broken door slab or smashed glass is listed as needing a carpenter, door installer or glazier, and that work is quoted by those trades rather than by the locksmith.

FeesSame any hour

Have it ready

Before you call · 0 / 3

(289) 805-4851

Let's clear a few things up

Someone reached through the sidelight to turn the thumb-turn. Should I fit a deadbolt keyed on both sides?

It is tempting, but a thumb-turn lets everyone in the household leave by that door without hunting for a key, special device or special knowledge, so a keyed inside cylinder is the wrong fix. Better answers are a tested security-film system or laminated glass in the sidelight to slow an arm from passing, moving the deadbolt beyond arm's reach of the glass where the door allows, and a glass-break sensor if you have an alarm.

How long does a break-in repair take?

It depends on how much gave way. A new lockset and a reinforced strike on a sound frame is a modest job. Bonding a split jamb, sleeving a crushed door edge, reinforcing the hinges and rekeying several cylinders takes longer, and a shattered frame means a securing visit now and a second visit after the carpenter. The locksmith gives a sense of the time once the damage has been seen, and the opening is secured before leaving even when a part has to be ordered.

Why did the frame break instead of the lock?

Because that is where the weak point was. A standard strike plate is held by two short screws in a soft wood jamb, and the deadbolt only reaches into a shallow pocket behind it. A kick delivers the full weight of a body to those screws, and the wood around them splits along the grain. The bolt itself is rarely the failure. That is why the repair concentrates on the strike side: a boxed strike, a full-depth pocket and long screws into the stud.

Sheridan Homelandsinformation

PeelOntario

Town
Sheridan Homelands, Peel
In business
27 years
Hours
Open 24/7
Nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

2021 census: what it means at the door

Every square is one home in a hundred.

  • 38 in 100 homes · mixed ages
  • About 38% of homes in Mississauga were built in 1980 or earlier, according to the 2021 Census.Where housing is mixed, doors that have been replaced sit beside doors that never were. A new door in an old frame, or an old door in a repaired frame, needs its strike and hinges checked together so the whole assembly works as one.
  • Single-detached houses make up about 37% of homes in Mississauga (2021 Census).Townhouse rows often share a keyway chosen by the builder. A locksmith can move a household onto a keyway of its own so a neighbour's key, or a key from the construction phase, no longer has any chance of fitting.

Source: Statistics Canada, Census Profile

Open Sheridan Homelands in Google Maps

On-site assessment

Request a visit.

Police have come and gone, the occurrence number is on a sticky note, and you are standing in a cold hallway looking at a splintered frame, wondering how the house gets locked before everyone tries…

(289) 805-4851, open 24/7.