Most forced doors fail at the strike, where two short screws hold a thin plate. We fit reinforced strikes into the framing, heavier deadbolts and rated cylinders, so the door holds as one piece.
Same fees day or night · Mississauga
Pick the closest, or call (289) 805-4851
Lockout ServicesLocked out of a home or business, a key snapped in the lock or a lock that has seized: entry with the least damage…
Change or Rekey LocksNew keys for the locks you have, or new locks where the hardware has worn out: rekeying, replacement, deadbolts, smart…
High Security LocksCylinders and deadbolts built to resist picking, bumping and drilling, keys that cannot be copied without…
Commercial LocksLocks for shops, offices and buildings: rekeying at turnover, commercial-grade hardware, exit devices, master key…For a business, a lock is really a question of who. Who holds a key, who left with one, who needs to get into the stockroom but not the office. We start with that list, then design around it: rekeying, a small master system, or a keypad that can drop a code the day someone leaves. The hardware is the easy part once the who is clear.
Nearby Erin Mills, Erindale, Erindale Woodlands, Sheridan Homelands and Sherwood Forrest
Practical locksmithing for real doors.
27 years in business · Let's fix that lock: (289) 805-4851
Home lockout service
We open, rekey, repair, replace and install. Under those five verbs sit dozens of specific jobs, from a stuck mailbox lock to a keypad on a warehouse door. The list below covers the ones people ask about most; if yours is missing, ask anyway.
Emergency locksmithing is quiet work done in noisy moments.
When a key is lost rather than stolen, the sensible response is usually a rekey rather than new hardware.
The key you reach for. The door you come home to. Good locksmith work begins with understanding how you use them.
Job sheet1 of 3
ServiceHigh Security Locks
Job sheet2 of 3
ServiceLock Replacement & Upgrade
Job sheet3 of 3
ServiceHome Lockout Service
Controlling the keys is the part of high security that costs nothing to understand and everything to ignore. If anyone can copy your key at a kiosk, a strong cylinder is one photocopy from useless. Patented keyways close that door.
Layer 1The key
You jiggle the key a little and the old deadbolt opens even when the cut does not look quite right. If your worn key can do that, you wonder what a stranger with the right tools could do.
Layer 2The cylinder
Someone tried the back door while you were away. The jamb is splintered around the strike, the bolt is bent, and the knob turns with a grinding feel.
Layer 3The bolt and strike
You moved in three weeks ago. The previous owner left a handful of keys, none labelled, and the bolt on the side door rattles in its housing.
Layer 4The door and frame
Police have come and gone, the occurrence number is on a sticky note, and you are standing in a cold hallway looking at a splintered frame, wondering how the house gets locked before everyone tries to sleep.
High Security Locks. You jiggle the key a little and the old deadbolt opens even when the cut does not look quite right.
Request a visit
Offices, retail, industrial units and shared buildings all come through this section. The work includes rekeying and master keys, replacing high-traffic hardware, repairing exit devices, and installing keypads or card readers where keys have become a liability.
Commercial LocksWhen
Safes
A safe opening and combination change service is built around confirming who has the right to be inside the safe before any tool touches it. Once that is settled, the locksmith identifies the safe's make, model and lock type, then works…
Tap a situation. The answer opens here.
If The key has to be wiggled just so before the lock gives.
Then A new key cut from the original code.
Copies of copies drift; a code-cut key feels the way the lock did when new.
If You want spares for the kids, the cleaner and the neighbour.
Then Duplicate keys cut properly from a good original.
Good spares turn like the original, and we can mark them by door.
If The front, side and back doors each take a different key.
Then Rekey them all to a single key.
Where the cylinders are the same keyway this is straightforward; where not, matching cylinders are fitted first. Lock Rekeying
Five scenes · open 24/7
For a business, a lock is really a question of who. Who holds a key, who left with one, who needs to get into the stockroom but not the office.
Step 1 of 5
Describe the property, the hardware and what has changed, and the visit starts from what you have seen.
Step 2 of 5
We look at the existing lock, the door thickness and the holes already drilled. Sometimes a new cylinder is enough; sometimes the whole lockset has earned its retirement.
Step 3 of 5
We explain, you decide, we work. If you would rather sleep on a bigger change, we do what is needed now and leave the rest for another visit.
Step 4 of 5
Every recommendation comes with the reason for it, in language that does not require you to know the trade. Ask why as often as you like.
Step 5 of 5
Tools packed, dust cleared, doors closed properly. We leave your home or business looking as it did, with the lock problem gone.
PeelOntario
Every square is one home in a hundred.
It is treated as one, with the same authority check: your new lease and identification settle it. The locksmith opens the previous occupant's locks, then rekeys or replaces them so keys still floating around from the last tenant stop working. It is also the moment to decide how the unit will be keyed: one key for every door, separate keys for the cash office and stockroom, or cores that suit a growing staff.
The broken blade is removed with extractors that grip it and draw it out toward the face, then the cylinder is opened normally. Keys rarely break in a healthy lock, so the cylinder is cleaned, the cam behind it checked for stiffness, and a dry lubricant applied. A new key is cut from the code or from the two pieces rather than from a worn spare, since a tired copy is usually what broke.
Yes. A business lockout covers every opening the premises relies on: the rear service door with its exit device, a roll-up shutter and its padlock, the compound gate, a mailbox in the lobby and interior doors such as the cash office or server closet. Mention each one when you call so the right padlock shackles, cores and cylinders are in the van, and so cylinders that should share a key are handled together.
Bumping uses a specially cut key that is struck while under light turning pressure, bouncing the pins to the shear line for an instant so an ordinary cylinder opens. It works on many standard pin tumblers. A high security cylinder needs its sidebar released by separately positioned finger or rotating pins at the same moment, and a bump key cannot set those, so the plug stays locked. It is one of the clearest advantages of the upgrade.
On-site assessment preferred · (289) 805-4851, open 24/7