If The key has to be wiggled just so before the lock gives.
Then A new key cut from the original code.
Copies of copies drift; a code-cut key feels the way the lock did when new.

Locks for shops, offices and buildings: rekeying at turnover, commercial-grade hardware, exit devices, master key systems and access control.
Offices, retail, industrial units and shared buildings all come through this section. The work includes rekeying and master keys, replacing high-traffic hardware, repairing exit devices, and installing keypads or card readers where keys have become a liability.
Commercial RekeyingThe renovation is finished and the contractors have gone, along with the loaner keys they used for six weeks.
Master Key System DesignAfter a busy shift the manager counts the keys coming back in and loses track of who still has one.
Access Control InstallationThe keypad on the side door has started sticking on cold mornings, codes get shared instead of reset, and half the staff still…
Panic & Exit HardwareA padlock went on the stockroom's back door years ago for security and nobody has thought about it since, until the walkthrough…
Commercial-Grade Lock ReplacementThe key to the office entrance turns with almost no resistance now, and some mornings the deadbolt does not fully retract until…Tap a situation. The answer opens here.
If The key has to be wiggled just so before the lock gives.
Then A new key cut from the original code.
Copies of copies drift; a code-cut key feels the way the lock did when new.
If You want spares for the kids, the cleaner and the neighbour.
Then Duplicate keys cut properly from a good original.
Good spares turn like the original, and we can mark them by door.
If The front, side and back doors each take a different key.
Then Rekey them all to a single key.
Where the cylinders are the same keyway this is straightforward; where not, matching cylinders are fitted first. Lock Rekeying
On-site assessment preferred · (289) 805-4851, open 24/7