Sound familiar?Sherwood Forrest
- The call
- The century home's original mortise lock takes a key the size of a spoon, sticks in humid weather and has worn its strike to a groove. You want a lock that works every day without giving up the old door.
Someone tried the back door while you were away. The jamb is splintered around the strike, the bolt is bent, and the knob turns with a grinding feel.
In plain words
Not every complaint about a lock ends in a new lock, and a good visit says so. A cylinder that turns stiffly may only need cleaning and fresh pins; a lost key calls for rekeying, which keeps the hardware and changes the key; a loose lever often wants a tightened spindle. Replacement earns its place when the mechanism is worn through, the housing is damaged, the grade was never adequate for the entrance, or you want a different function, finish or a keypad. The locksmith lays the three routes side by side so the choice rests on what the door needs rather than on what is in the van.
Lock Replacement & Upgrade · Sherwood Forrest
How the visit goes
Scene 1
Measuring the existing preparation
Before any product is chosen the door is measured. Backset first, the distance from the door edge to the centre of the bore, which on most doors here is 60 or 70 millimetres. Then the cross-bore diameter, the edge-bore size, the shape of the latch faceplate, the door thickness and the handing. The strike cut-out and any glass, trim or storm door that limits where hardware can sit are noted too. These few numbers decide which locks will drop straight into the door and which would need a filler plate, an extension kit or fresh drilling, so they are written down before the catalogue is opened.
Scene 2
Installing a keypad or smart deadbolt
A smart lock is fitted like any deadbolt, then brought to life. The bolt and exterior keypad go on first, the interior module with its battery pack after, and the door is closed so the lock can learn where the bolt sits; a bolt that meets resistance in the strike is corrected before pairing, because a straining motor drains batteries and fails early. Codes are programmed for each person, auto-lock and sound settings are set to your liking, any phone or hub pairing is completed, and the mechanical override cylinder is tested with its key. Fresh batteries go in last.
Scene 3
A smart lock with its backup arranged
A keypad or smart deadbolt leaves the visit with codes set for each person, auto-lock and alerts configured, and any phone pairing confirmed while the locksmith is there to check it. You are shown the low-battery signal so you recognise it, and the type of battery the maker calls for. The mechanical override key is the piece to look after: keep it on a keyring or with a neighbour rather than inside the home it opens. A second person's code is set up before the locksmith leaves, so a flat phone or a forgotten code is never a reason to stand on the porch.
In the van
- Knob or lever entry set
- 75 millimetre strike and hinge screws
- Reinforced strike plate and strike box
- Cylinders, plug follower and pinning kit
- Adjustable latch or bolt
What shapes the quoteErindale Lock Experts
- Keys cut
- Each key is counted, and restricted keys cut against a card are a different item from standard blanks. Say how many people need one and the quote lists them.
- Grade of hardware
- A light Grade 3 knob set, a residential deadbolt with a strong label rating and a Grade 1 commercial-style deadbolt are different products at different levels, and the quote follows the grade you choose for each door.
- Special-order hardware
- Most standard locks come from the van. A specific style, an unusual finish or a restricted system may need ordering, which affects scheduling and is noted in the quote rather than discovered on the day.
FeesSame any hour
Let's clear a few things up
Can I replace only the deadbolt and keep my existing knob?
Yes. The deadbolt and the knob or lever are separate locks in separate bores, so one can be replaced while the other stays. The new deadbolt can be pinned to work on the same key as the knob if the keyways are compatible, and its finish can be matched to the knob so the door looks intended. Replacing the deadbolt first is a sensible order, since it does most of the securing.
My door has glass beside it. Should I fit a deadbolt keyed on both sides?
A keyed interior cylinder means finding a key to get out, which is not what you want on a door people use every day. The steadier answer for a door with glass is a single-cylinder deadbolt with a thumb-turn, combined with a reinforced strike, a longer bolt and a security film or laminated glass in the sidelight.
Can a lever replace a knob on the same door?
Yes, and it is a common change for anyone who finds a knob hard to grip. Levers use the same bore and backset as knobs, so the swap is usually a direct fit. Levers are handed, so the locksmith checks which way the door swings and chooses or adjusts the lever accordingly. A keyed entry lever pairs well with a deadbolt above it, and interior passage and privacy levers complete the set.
Change or Rekey Locks
- Deadbolt InstallationYou moved in three weeks ago.
- Vintage Mortise Lock ServiceThe knob flops loose on its spindle and never springs back to level.
- Smart Lock InstallationYou have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down…
- Gate & Building Entry LocksSomeone pried at the gate latch overnight, and now the strike plate hangs by one screw and the cylinder spins loose in its…
- Mailbox Lock ReplacementThe little brass key for your curbside mailbox was on the same ring as the one you lost at the gym last week.
Sherwood Forrestinformation
PeelOntario
Lock Replacement & Upgrade · Mississauga, Erin Mills, Erindale, Erindale Woodlands, Sheridan Homelands
- Town
- Sherwood Forrest, Peel
- In business
- 27 years
- Hours
- Open 24/7
- Nights, weekends and holidays, same fees
- Phone
- (289) 805-4851
- Visits
- On-site assessment preferred. Request a visit or call.
2021 census: what it means at the door
Every square is one home in a hundred.
- 38 in 100 homes · mixed ages
- 37 in 100 homes · mostly attached
- About 38% of homes in Mississauga were built in 1980 or earlier, according to the 2021 Census.In areas with homes from many decades, a locksmith gets to match the solution to the house rather than apply one answer everywhere. Period hardware stays on the houses that suit it; modern security goes where the door and the household want it.
- Single-detached houses make up about 37% of homes in Mississauga (2021 Census).Where most people live in townhouses, apartments or condos, doors come in two kinds: the suite door you control and the shared entrances the building manages. A locksmith works on your door freely and coordinates with management on the rest.
On-site assessment
Request a visit.
Someone tried the back door while you were away.
(289) 805-4851, open 24/7.